Wednesday, 29 June 2011

Sentinel 8805

In February 2011, I attended the Sentinel Drivers' Club AGM in Basingstoke. In conversation after the formalities, I met Norman Smedley who proclaimed that, in the boot of his car, he had a 7.25 inch gauge model of the unique LMS Sentinel-Doble shunter numbered 7192.

Not the normal car boot contents I thought (with raised eyebrows) and, at Norman's invitation, went to have a look.

Although 7109 is a 12 inch to the foot scale, I've long admired the amazing amount of time and effort that goes into model locos. This was another moment of admiration.

Car boot contents (1)
Car boot contents (2)
Amazing detail (and not just the boot catch!)
Right hand side
Norman sent me this photo recently of the model nearing completion and what a fantastic model it is! I'm very much looking forward to seeing it in action.
Nearing completion (June 2011)
The 'prototype' for Norman's model was the only true Doble loco built by Sentinel, works number 8805, and delivered to the LMS in 1933. It was driven by two 150 HP Doble engines, one for each axle, and had an oil-fired 1500psi boiler and condenser! Whilst it performed well, it was too complex to maintain and was withdrawn in 1943. (Norman's model will be battery powered!).
Sentinel 8805 (Photo Tony Thomas)
And again (Photo Tony Thomas)
As 7192 numerically follows Radstock's 7190 and 7191, this is the reason why 7109 will not carry the number 47192. See also 7109 Restoration.

Monday, 27 June 2011

Sentinel 7109's Superheater passes 550psi Hydraulic test

After repairs, a boiler has to pass an initial hydraulic test (water) at 1.5 times working pressure to ensure that it is physically sound. The superheater, because it works at a higher temperature to produce dry steam, has to pass its initial hydraulic test at 2 times working pressure. For a Sentinel, this means 550 psi (~38 bar).

I'd thought that the hydraulic test would require some pretty sophisticated equipment; however, this is not the case.

First the far end of the tubes need to be blocked. The sealed ends can be slackened to let air out so that there is only incompressible water contained.

Blocked superheater tube-ends
Then an artistic arrangement of pipework is attached at the near end (the bicycle wheel is not essential).
Artistic pipework
The hydraulic pump is then connected to the artistic pipework and pressure applied.
Check the gauge reading...
...this one's easier to read.
About 565 psi (39 bar)
So how is the pressure applied, I hear you ask? (Note the video was shot by the owner). Starring Justin & Pete.


(Any suggestions for the owner to do the hard work are met fiercely by the camera lens!). Clearer video on YouTube.

The pressure has to be held for at least 30 minutes. If satisfactory, then the test is deemed passed and a certificate written on the spot and issued.
Al fresco computing
Many thanks to Justin Goold of J R Goold Vintage Steam Restorations Ltd and Peter Hawkins of Hawkins Inspection Services Ltd for their services.

Sunday, 26 June 2011

Sentinel 7232 Ann

As background to the restoration of Sentinel 7109, I've visited some other Sentinel locos and, in some cases, done a pretty thorough photo-reconnaissance  of internal bits and pieces.  My visit to the picturesque Embsay and Bolton Abbey Railway near Skipton, West Yorkshire, in June 2011 was not one of the thorough photo sessions but interesting all the same. Ian Douglas kindly showed me around.
Sentinel 7232 Ann (1)
Sentinel 7232 Ann (2)
Built in 1927, Ann is a single-engined balanced Sentinel steamer rated at 80hp. It spent its working life at British Tar Products Ltd, Irlam, Manchester UK. Now at Embsay, it has not run since 2007 due to safety valve problems and the boiler being out of ticket.  Its operating future is uncertain (June 2011).

More details are available from the Embsay and Bolton Abbey Railway website.

Saturday, 25 June 2011

Sentinel 7109's Blowdown Valve

The blowdown valve is used for clearing out (blowing down) accumulated scale, rust and assorted particles from the bottom of the boiler. 7109 was missing this item on arrival and it has taken a long time to find one capable of handling the high 275psi boiler pressure. John Goold has obtained a new old-stock type as in the picture with 4.25 inch diameter undrilled flanges.
New Old-stock Blowdown Valve
It has to be fitted on to a flanged "drain-pipe" at the bottom of the boiler (it has been cleaned up and the snow has melted since this December 2010 picture was taken).
Blowdown valve "drain-pipe" flange
And then there is the spanner needed to operate the valve from a suitable distance. And the angle of attack to avoid the spanner operator from being steam-cleaned!

Sentinel 7109's Polished set of gauge glass valves

All loco or waggon boilers use a gauge glass to enable the fireman to see the boiler's water level. A glass tube between an upper and lower gauge glass valve is where the actual water level can be seen. The upper and lower valves are used to ensure that the level is indicating correctly and that any doubtful muck can be jettisoned when required.

Luckily, 7109 came complete with gauge glass valves attached to the boiler although they were in an unknown condition at the time and looking fairly dull.

Gauge Glass Valves as arrived (with curved handles)
Gauge glass valves to fit Sentinel boilers are unusual in that they have to have a curved surface to match the cylindrical curvature of the boiler profile.
Gauge Glass Valves after a little cleaning
(and much improved in bright light!)
 The internal moving parts of the valves, despite my initial (naive) attempts, were not in a good state. The curved handles indicated an old design that was famed for leaking badly. 
"Klinger" Valves spindles (Photo Heritage Steam Supplies)
John Goold advised the rebuilding of the valves to the "Klinger" design and this has been completed. 
Good as new and not so dull!
The almost as-new look has been achieved by 'pickling'.  I never quite understood whether this was to do with an extended visit to the pub or a dip in an acid bath but the end result looks brilliant!
Related Posts Plugin for WordPress, Blogger...